Laser 6084 Brake Disc Run Out Kit review

Warped brake discs may not only be annoying but can also be a potentially dangerous fault that can develop on motorcycles, but with this kit you can check if your bike is so afflicted and, if so, by exactly how much the discs are affected so that you can determine potential repair. 

They usually develop by overheating and can normally be identified by a pulsing sensation felt at the brake lever. In extreme cases warped discs can knock the pistons back into the caliper reducing braking power. 

The Laser 6084 is a three-piece kit specifically designed to allow a Dial Test Indicator (DTi) gauge to be mounted in position to measure potential disc warp. It costs £109 and is available from Machine Mart either in-store via its comprehensive UK network of stores or online via its slick web store. 

The kit comprises a DTi gauge, a flexible, segmented steel mounting and a pair of specially adapted locking pliers, all presented in a bespoke, heavy duty plastic storage case. The locking pliers allow the tool to be locked to almost any adjacent bracket or component, while its unique design also allows the gauge to be rigidly mounted in almost any position. 

Then, with the gauge mounted securely against the disc and the disc rotated, warp or ‘run out’ can be measured to a maximum deflection of 10mm to an accuracy of 0.01mm. 

What’s more, although designed for use on motorcycles, the same set-up can also be used to measure warp or run out on a range of applications, such as flywheels, propellor shafts, crankshafts, lathes and more. 

Overall, the Laser 6084 Brake Disc Run Out Kit is well thought-out, easy to use, versatile, effective and good value, too. 

For more information on the Laser 6084 Brake Disc Run Out Kit or on lots of other bike specific products from Machine Mart go to their official website.