New Norton Villiers two-stroke

British firm aims to breath new life into the two-stroke

NORTON VILLIERS – not to be confused with the reborn Norton bike brand – is set to reveal a new take on the two-stroke engine concept in the near future.

The firm claims to have developed a new motor that has all the two-stroke benefits of light weight and high power, but doesn't struggle to meet emissions laws.

Technical details are thin on the ground, but here's the firm's press release:

For the last 8 years, we at Norton Villiers, along with partners Villiers Engines and DMW, have been developing a completely new, innovative two stroke engine design.

Due to I.P. restrictions (Intellectual Property rights), the engine design is currently in the Patent process and thus I can only briefly give the principles of this exciting engine. Unlike its current 2-stroke engine predecessor that runs on a pre mix fuel (oil & petrol mix) our engine runs on PLAIN fuel with no additives. Diesel and Bio-fuel variants are also in development. This will enable Norton Villiers to re-create its industrial division to cater for the industry, construction, heavy haulage and the shipping industry.

Our engine is designed for the present and the future, so the components we have designed are the very latest in technological design. For instance, ceramic bearings, Teflon and other coated surface treatments not yet on the market. Components will be treated with an advanced formula that never needs lubrication. This advanced formula is currently being tried and tested with a number of leading car manufacturers and within the aircraft design industry.

The engine is super charged by a Norton Villiers system giving controlled, outstanding, advanced power output over any of its rival engines. This advanced system exerts little to no drag when the engine is not driving. The control of the engine is via the latest engine management system including a laser ignition system which is under test. The engine has a Norton Villiers unique variable scavenge system giving reduced emissions.

These reduced emissions will meet the current and the impending lower emission levels being introduced by the E.U. The carbon footprint made by our engines will be the descendants of any impurities within the fuel: The cleaner the fuel the lower the carbon footprint.

The engine is lubricated by a Norton Villiers controlled spray system, designed to give a minuscule level of drag on the engine and surfaces.

One of our advantages over our engine manufacturing rivals is that our engines are wholly adaptable for ubiquitous purposes from a chain saw to multi cylinder engines, to all transportation needs including shipping and F1 engines.

Why a two stroke over a four stroke?

Our “FITS” engine will produce some 30+% more power output than its equivalent 4 stroke rival. This takes into account any engine drag caused by the engine components i.e. bearings, induction system, clutch, gearbox etc. Since the 2 stroke fires on every second stoke while the 4 stroke fires on every fourth stroke, it gives a significantly increased power output.

The production cost of our “FITS” engines would be some 60% less than its equivalent 4 stroke counter part. This of course is after engine plant set up costs. A car with an engine size of say 1000cc could be reduced to approximately 600cc with our FITS engine, resulting in lower fuel costs, lower insurance rates and so on. We have been approached by a company designing low cost vehicles to use our engines to cater for the Mobility market, the under 25’s age group and developing countries.

We have held talks with a number of leading universities, including Queens University Belfast. These talks utilise a wide range of engineering excellence, covering surface treatments, engine management, engine scavenge to engine design.

Our only competitor or rival, if this is appropriate term, is a company in the USA which is developing an engine known as the “OPOC” engine, which can be Googled. This engine is much more cumbersome than ours and thus would have limited applications.

The only advantage that this company have on Norton Villiers is the fact Bill Gates of Microsoft has funded their R&D by some $50 million dollars.

As mentioned we are working with a number of leading Universities and hope to have an animated drawing for you to view in the next few weeks.