Used Bike

Suzuki Suzuki GSX-R750 and 1100 - the originals

A pair of original GSX-R750s...

Riding one original GSX-R is a treat these days. But two at once? You are spoiling us Meester Middlehurst!!

Details
Manufacturer:
Suzuki
Category:
Classic Sportsbikes
Overall
Not rated

YOU CAN'T have failed to notice the rise in popularity of retro machinery of late. So we're taking a look back at two of the most evocative sportsbikes ever made - Suzuki's GSX-R750 and GSX-R1100. Our man Tony Middlehurst tracked down the owner of several sweet sweet original GSX-Rs, and blagged a day out on them, the swine. Here's how he got on - and the back story of the GSX-Rs from a man who was there at the time...

IT'S THE early 1980s. Your name is Etsuo Yokouchi, you work for Suzuki in the engine design department, and you’ve just been told to produce, from scratch, a completely new kind of 750 sports motorcycle. One that will, straight out of the box, destroy the opposition not just on the street but also on the racetrack. 

Wow. Er, OK.

In the preceding ten years, Honda and Kawasaki had been battling for the performance crown. Honda started the power wars off with its 68bhp CB750. Kawasaki’s 900cc Z1 of 1973 raised the bar to 81bhp. By 1978, Suzuki fans had their own superbike, the 90bhp GS1000. It was a fine machine, but still old school in its design and heft. For Suzuki, the 750 class was a much more logical target for disruption, particularly if motorsport was going to be part of the plan – which, for them, it most definitely was. 

A whole new approach was needed. There would be horsepower, sure, but it would be harnessed in a very different way. Rather than the heavy-metal battleaxes of Honda and Kawasaki, Suzuki’s entrant into the hypersports market would be a rapier, employing the ‘add lightness’ principles established in the F1 car world by visionaries like Colin Chapman.

1985 GSX-R750

Sometime racer Yokouchi was excited by the challenge. So were the members of his engineering team, many of whom were enthusiastic weekend ‘company racers’ who up to that point had been obliged to try and get their kicks (and keep the company end up) aboard the heavy and gutless GSX750. 

Yokouchi told his crew to build him a 750 engine that would deliver 100bhp and 146mph. That may not seem a lot for a 750 today, but in the early 1980s when the development of the GSX-R began, it was off the scale. The engineers were given carte blanche to change anything and everything. That meant a radical new look at both engine and chassis design and an even more radical look at weight saving. 

Yokouchi then got his team to dissemble a 1983 GSX750E, marking each engine and chassis part with a red or blue dot. Red parts were those that wore quickly or failed: blue parts were those that never or very rarely broke. Analysis of the results showed a preponderance of blue parts, which was great news in terms of reliability, but not so good from a weight perpective. A much more adventurous (not to say risky) plan would be needed for the new bike. 

Early experimentation on a GSX750 brought 97bhp, unheard of for a production bike of that capacity, but still short of Yokouchi’s demands. They were on the limit with that 97bhp motor, anyway. During dyno testing it regularly blew the aluminium out of the spark plugs, loosened the cylinder sleeves and bent the valves. Not something that would have played that well in the retail environment. 

GSX-R750F carbs

Eventually Suzuki’s engineers came through with an uncompromising but also reliable motor featuring 29mm flat-slide carbs, some magnesium components, and a 100bhp+ output. All the engine parts had been optimised not just for weight but also for durability. The motor was successfully dyno tested, screaming hard on the redline for a full 24 hours without breakage. In works racer spec it could go to 130bhp. 

Getting rid of engine heat had been Yokouchi’s team’s biggest challenge. Remember that engines were still air-cooled at the time. Chucking on a full watercooling system would have boosted reliability but would also have added around 10% more weight to the engine package. 

GSX-R original decals

The solution they came up was ingenious: better air cooling combined with a separate oil cooling setup for the top half of the engine. They called it SACS – Suzuki Advanced Cooling System. The SACS system delivered watercooling levels of heat dissipation without the weight penalty. 

Out went the old GSX750’s tubular steel cradle frame, which tipped the scales at nearly 40 pounds. In its place came a box-section aluminium MR-ALBOX chassis with a minimal amount of welding. It was so light – just 17 pounds – that the Hamamatsu line workers at the factory could easily pick them up with one hand. 

1985 GSX-R750 frame

The tank sat on the frame, not over it, showcasing the gorgeous frame and swingarm in a wholly new way. The twin-headlamp fairing and seat unit had no unnecessary curves. The bike’s flat and utterly functional look made it the nearest thing to an endurance racer yet, and gave rise to the ‘slabside’ nickname. 

The ‘racer on the road’ thing wasn’t just a look. It was real. The clocks mounted in foam, the braced 41mm forks, the tank breather tube and flip-back filler cap, the 18in wheels specified to ease the lives of endurance race teams when just about every other road bike had 17s – it was all real. 

GSX-R750 clocks

The whole shebang weighed in at 176kg in US spec and 179kg for the Japanese domestic market version. That was a staggering 20% cut on the norm for the 750 class at the time. 

The GSX-R 750F was shown at the 1984 Cologne bike show and put on sale in March 1985 at a temptingly affordable price. I was working for SuperBike magazine at the time, and can still remember the seismic impact it had on sports motorcycling. The visual promise was fully backed by reality, too. Not just on the road where, if you likened previous 750s to a thrush or a sparrow, the GSX-R was a humming-bird – fast, darty, super-light, and hugely responsive – but also on the world’s great racetracks. On its world endurance debut, the Le Mans 24 Hours, it came first and second – an unbelievable result. 

One year after the first 750 appeared, Suzuki acknowledged complaints about twitchiness by adding an inch to the R’s swingarm, a mod that was incorporated into the new-for-1986 GSX-R 1100J, an alloy-framed big-bore iteration of the R phenomenon. The 750’s incredibly spindly wheels were beefed up to stop racers’ complaints about them twisting under pressure. 

GSX-R750F front brake

Subsequent GSX-Rs became more rounded and generally softer as dull economics and the need to think about the bottom line got in the way of specialisation. In most aspects of performance, the later Rs were probably objectively better. They just didn’t seem it. As the laser focus of the first-gen bikes was progressively lost, the chasm that had been opened up over the opposition by that first GSX-R quickly eroded away.

NEXT - WHAT THESE BIKES ARE LIKE TO RIDE NOW...