Search

Search results

1. Cheap exhaust and induction modifications for a D

   ... (2 screws) and remove the plastic slider/spring/needle. Cut 4 coils off the slider spring within the carb. Drilled out the holes ... had chance to do some fuel mixture checks yet, i.e. engine cut at full, load and check plug colour, (which was the method I have ...

   MTR - 10/05/2024 - 04:24 - 0 comments

2. Superbike Outdoor Cover

   ... Overall Review Would buy again, but only at cut price, paying upwards of 50 quid for this (including delivery) is far far ... actually get, and it has too many problems. It should be cut so you can put the wheel on full lock and retain the shape of the cover ...

   Anonymous (not verified) - 01/10/2011 - 00:00 - 3 comments

3. Visordown's Used Motorcycle Buying Tips

   ... is a good thing. Has the standard numberplate hanger been cut down, bodged, or has an aftermarket one been fitted? This example has been cut down and the indicators have been replaced. A heavily cut-down standard ...

   rgo - 10/05/2024 - 04:09 - 0 comments

4. KTM reveals details of SX-E 3 off-road kids minibike

   ... to KTM. On the safety side of things, the motor will be cut in case of a crash thanks to a roll-over sensor. Additionally, a lanyard key worn by the rider will cause the power to be cut “in the event of an unforeseen riding scenario,” KTM says.  New ...

   Alex Whitworth - 13/09/2022 - 11:35 - 0 comments

5. Angel ST review

   ... this tyre gains mid-corner in the wet with that  deeply cut tread, it loses in the dry with too much movement. Not a bad tyre at all, ... this tyre gains mid-corner in the wet with that  deeply cut tread, it loses in the dry with too much movement. Not a bad tyre at all, ...

   Anonymous (not verified) - 23/09/2019 - 09:35 - 0 comments

6. Where Are They Now? Giancarlo Falappa

   ... wheelies. But a horrific crash during testing in 1994 cut his career dead. So where is he now? You may well have spotted his ... wheelies. But a horrific crash during testing in 1994 cut his career dead. You may well have spotted his motorhome at various ...

   Anonymous (not verified) - 10/05/2024 - 04:24 - 0 comments

7. First impressions: PJB ‘Garage Defender Master’ and padlock, £63.00

   ... the bar. Either they just flex in the door with a prybar, or cut the whole thing off with an angle grinder in seconds. ... an up-and-over garage door. It would probably be easier to cut through the door itself than this garage defender. I'd rather have it than ...

   Steve Farrell - 10/05/2024 - 03:49 - 11 comments

8. FMX650 (2005 - 2009)

   ... think that's unfairly maligning it. It might not be able to cut it on a motard circuit, but it's a brilliant urban tool and handles ... like they were pulled out the parts bin-they either need cut down or the back end raised,depending on your leg size-would sharpen up the ...

   Ben Cope - 27/04/2008 - 00:00 - 3 comments

9. How to keep your motorcycle safe from theft over winter and beyond

   ... make it as difficult as possible for the would-be thief to cut or prise the lock from the bike. Also, think about which wheel you ... chain will greatly increase the time it takes the thief to cut through and acts as an even bigger visible deterrent to a would-be thief. ...

   Simon Hancocks - 09/12/2021 - 15:46

10. V-Strom 1000 long-termer goes back to Suzuki

    ... was a steal, but they're not. Both systems occasionally cut in when they shouldn't meaning you're likely to end up turning them off ... a car last week when the ABS system got confused over some cut up tarmac. If the Suzuki were £7,500 I'd think 'that's a lot of bike ...

    Luke Bowler - 10/05/2024 - 03:52 - 0 comments

Pages