Primary tabs

Search

Search results

  1. D.I.Y - How to change your clutch plates and springs

    ... thing you want to do is soak the new friction plates in clean, fresh engine oil for a few hours before fitting them. So do that. And ... To that end, we got a new oil filter and a few litres of clean, fresh oil to hand before warming the engine, draining the old stuff out ...

    Anonymous (not verified) - 22/09/2019 - 19:20 - 0 comments

  2. D.I.Y: Motorcycle cleaning

    ... can go top-to-bottom or front-to-back, but the trick is to clean a small area then rinse, clean then rinse... You get the idea. Use sponges on the bodywork, brushes ...

    rgo - 23/09/2019 - 00:52 - 0 comments

  3. Daytona 600 (2003 - 2005)

    ... pain as the bike gets too hot. The stock can is a pain to clean, even more so when your boot catches it. ... GOOD CLEAN FUN Submitted by Michael Neal on Tue, 11/03/2008 - ...

    Ben Cope - 01/01/2003 - 00:00 - 11 comments

  4. 10 maintenance tasks to do yourself

    ... spinning on a new filter. Smear the rubber filter gasket in clean oil before tightening by hand. Nip it up half a turn with the filter ... pads being swapped with the caliper in place .  10. Clean it UNLESS YOU'RE a commuter and don't have time, washing ...

    Visordown - 23/09/2019 - 00:52 - 30 comments

  5. Harley-Davidson agrees new Hero deal for India, new models on the way

    ... - 11:36 Keeping you pool clean is the time consuming task. As one of the largest pool, spa and Jacuzzi ... you to the process of what kind of supplies you required to clean you supplies. We also tell you how to buy best <a href=" ... Pool Supplies Perth: You need the right tools to properly clean and maintain your little piece of backyard paradise into your house. But ...

    Ollie Barstow - 29/10/2020 - 09:33 - 28 comments

  6. Make your bike better for nowt

    Get it clean There’s nothing like a tank/bodywork-off spring clean to restore your bike's karma. Use a good bike cleaner spray, work it in ... it off for a nice, cack-free bike. Only when a bike is clean can you spot errant or loose fasteners, dodgy wiring or parts that foul ...

    MF - 23/09/2019 - 00:52 - 0 comments

  7. Used Review: Honda CB600F Hornet

    ... gear was spartan and simplistic, but the whole plot had clean lines and pleasant looks. The Hornet was originally blessed (or ... solve, this. Strip the pump out (there's only three bolts), clean out the crap and add fresh fluid/coolant. Job done. Forks ...

    Anonymous (not verified) - 22/09/2019 - 19:20 - 0 comments

  8. Harley-Davidson Softail Slim

    ... me." To keep the rear of the motorcycle simple and clean, the Slim has combination stop/turn/tail lights and a side-mounted ... rider and the machine. The Softail® chassis mimics the clean lines of a vintage hardtail frame, but utilizes rear suspension control ...

    rgo - 19/09/2018 - 03:49 - 0 comments

  9. How to replace wheel bearings

    ... Now raise the front wheel and remove it. Remove any spacers, clean, and put them safe in the order they were removed to avoid any confusion ... out, give the hub and bearing spacer tube a really good clean, getting rid of any old grease and muck that’s accumulated over the ...

    James Whitham - 19/09/2018 - 08:01 - 0 comments

  10. The professionals: Matt Wilde, Motorcycle Paramedic

    ... SO, HAVE YOU EVER USED A MOP AND BUCKET TO CLEAN A SCENE WHEN YOU GOT THERE? Yes, and a hose in the back of the ...

    Ben Cope - 19/09/2018 - 08:01 - 0 comments

Pages