Primary tabs

Search

Search results

  1. WorldSBK Misano | Rea turns it on when it matters to claim 2021 pole hat-trick

    Jonathan Rea continued to ratchet up the pressure on his WorldSBK Championship rivals by once again going against the ... and this morning's FP3 but with the Italian buckling under pressure to end up in fourth, the way was cleared for Rea to maintain his 100% ...

    Ollie Barstow - 12/06/2021 - 12:06

  2. Understanding Quickshifters and Slipper Clutches

    ... drive from the engine to the gearbox shaft. Slacken off the pressure between the two plates to create a slight gap and 'slip' will occur so ... drive, and as you pull the clutch lever in you slacken the pressure from the springs, causing the clutch to 'slip'. The gearbox shaft is ...

    rgo - 10/05/2024 - 04:15 - 0 comments

  3. D.I.Y - How to change your clutch plates and springs

    ... and put to one side. Now undo the bolts holding the pressure plate. They shouldn't be too tight, but bear in mind the bolts are ... still. Undo each a little at a time to evenly release the pressure on all the springs. With them all undone, put the bolts and springs to ...

    Anonymous (not verified) - 10/05/2024 - 04:24 - 0 comments

  4. MP urges commuters onto motorcycles – as long as they are electric

    ... accImages.createImage(); PRESSURE is mounting on the UK government to realise and embrace the potential ... petrol powered bikes, it does at least go to show that the pressure asserted on the government is starting to work. ...

    Simon Hancocks - 21/05/2020 - 16:38 - 2 comments

  5. The Science of Brakes

    ... bikes in the past few years might have taken some pressure off what stoppers have to cope with, if only riders weren't busy ... to warping and wear. Do this by braking with medium pressure from 60mph to 30mph, releasing the brakes then accelerating back up ... But brake caliper pistons have to be round, so to keep the pressure even across the pad, the solution is to have two pistons operating on ...

    rgo - 10/05/2024 - 04:15 - 0 comments

  6. Red missed | MotoGP, WorldSBK riders getting comeuppance for bizarrest reasons

    ... sport, motorcycle racing can raise tensions, heighten blood pressure and result in moments of sheer madness… Take Dominique ... side of the sport. The Colombian rider was already under pressure from his Pedercini Kawasaki team after failing to secure a visa in ...

    Ollie Barstow - 18/04/2023 - 22:56 - 0 comments

  7. Harley-Davidson agrees new Hero deal for India, new models on the way

    ... Seems a lot of business are under pressure with everything that has happened this year. ... automatic Pool robot cleaner that are mostly used: robotic, pressure, and suction. Robotic vacuums Robotic vacuums are energy-efficient ...

    Ollie Barstow - 29/10/2020 - 09:33 - 28 comments

  8. Why is Jonathan Rea being singled out over WorldSBK boycott drama?

    ... riders, were ‘underhand’ tactics by the organisers to pressure teams into forcing its riders to ride as part of its contractual ... alone leads to the conclusion that he did indeed come under pressure from within to line up and it is unlikely he’d want to have too much ...

    Ollie Barstow - 13/10/2019 - 20:52 - 0 comments

  9. Ultimate motorcycling cleaning and polishing guide

    ... I rinse down my bike with a standard hose, building up pressure using the age-old 'thumb over the end' technique. The front-end of the ... It's safe for all wheel types but best to not use a lot of pressure. Just run it over the surfaces, agitating the dirt and working it ...

    Ben Cope - 10/05/2024 - 04:24 - 6 comments

  10. GP Racer D211 review

    ... constitutes a flat tyre in my book. That’s the sort of pressure Dougie Lampkin might run. Apparently it’s something to do with the ... for longer life, and the revolutionary NTEC system provides pressure tuning options that will satisfy the most hard-core track day fanatic ...

    Anonymous (not verified) - 23/09/2019 - 09:35 - 0 comments

Pages