YouTube:
Instagram:
Facebook:
Twitter:
EITHER way we're glad 'DeathBunny' is okay. ...
Visordown - 19/09/2018 - 08:01 - 19 comments
... the road. Then we got into the 300 rears with the jackshaft sprocket and double chain and that let us bolt them right on no problem.” ... available, so we had to machine hubs for the rear brake, sprocket and everything else. Another problem was keeping the chain in a ...
rgo - 23/09/2019 - 00:52 - 0 comments
... but that was down a steep hill with a larger than standard sprocket and it was at its absolute limit rev wise. Only buy it if you can ... by me with a Leo Vince exhaust,re-jetted,13 tooth sprocket and a Athena CDi unit.)Power is good and hadling is on par with larger ...
Ben Cope - 01/01/1997 - 00:00 - 4 comments
... a stranded Richard Elwood on his CR250. Richard’s front sprocket bolt had fallen out which caused the sprocket to come off at high speed! The man was flat-out when it happened so ...
rgo - 22/09/2019 - 21:21 - 0 comments
... Power: 334HP @ 12,800rpm (At the countershaft sprocket) Torque: 214Nm @ 9,500rpm (At the countershaft sprocket) Exhaust: 2 x 4-2-1 titanium ...
HazaMck - 22/08/2019 - 16:19 - 0 comments
... but as it is over geared, a swift change to the other front sprocket it comes with pretty much sorts that out (and cans/remap sort it ... service at your dealer) decent cans, and a 15t primary sprocket + go up 2 teeth on rear, that will sort all of the snatchiness and ...
Ben Cope - 01/01/2006 - 00:00 - 20 comments
... push the wheel forward and remove the chain from the sprocket. Holding the rear wheel with one hand remove rear axle spindle and ... Check everything is lined up correctly, and refit chain over sprocket. Then place rear caliper over new wavey discs and torque bolts ...
HazaMck - 02/10/2019 - 16:48 - 0 comments
... A couple of seized camchains have been reported, and gearbox sprocket oil seals can leak on the Mk 2 850s, but not all suffer from it. ... A couple of seized camchains have been reported, and gearbox sprocket oil seals can leak on the Mk 2 850s, but not all suffer from it. ...
Anonymous (not verified) - 22/09/2019 - 19:20 - 0 comments
... Slide the wheel forward and unhook the chain from the rear sprocket, laying it over the swingarm out of the way. Next, gently tap the ... the bits safe in order. Pull out the rear sprocket carrier, and you can now unbolt the rear disc. Sit the wheel on a shop ...
Al Dowds - 23/09/2019 - 09:35 - 0 comments
... 600 we're working on here has its push-rod actuated from the sprocket side, so no need to do that here. Also bear in mind there may be some ... 600 we're working on here has its push-rod actuated from the sprocket side, so no need to do that here. Also bear in mind there may be some ...
Anonymous (not verified) - 22/09/2019 - 19:20 - 0 comments