Primary tabs

Search

Search results

  1. Yamaha R6 to be discontinued although track-only R6 Race lives on

    ... race rear set with optional reverse shifting kit Rear sprocket guard (shark fin) Sprocket drive 14T fits 520 chain conversion Rear sprocket, 45 fits 520 ...

    Simon Hancocks - 17/11/2020 - 17:45 - 0 comments

  2. VFR750 RC36 (1990 - 1997) review

    ... on the gear lever output shaft to hold it in. Front Sprocket Bolt The bolt holding the front sprocket on can work loose. If you remove it make sure you clean the threads, ...

    Ben Cope - 23/09/2019 - 09:35 - 0 comments

  3. G450X (2009 - present) review

    ... that. At the heart of its innovation is the genius drive-sprocket arrangement. The entire motorcycle has been built around the gearbox sprocket, and here’s why. On conventional dirtbikes, the drive chain is ...

    Ben Cope - 23/09/2019 - 09:35 - 0 comments

  4. Monster 1100 Evo

    ... Weaknesses Needs front sprocket dropping from 15 to 14 tooth. First two gears are much to long with 15 tooth sprocket but bike is genuinely transformed with 14 tooth sprocket and despite ...

    Anonymous (not verified) - 01/04/2011 - 00:00 - 3 comments

  5. D.I.Y: Wheel Removal

    ... supporting it, unhook the now-slack chain from the rear sprocket and hook it over the end of the swingarm (shaft drive owners can take ... mounting bracket. Remove the spacers from the hub and sprocket carrier, and remove the cush drive rubbers from the hub, then refit ...

    rgo - 23/09/2019 - 00:52 - 0 comments

  6. Harley's real new model for 2013

    ... Turbine wheels with matching brake discs and drive sprocket are highly polished and chrome plated. Front and Rear Fenders ...

    rgo - 19/09/2018 - 03:49 - 0 comments

  7. what is Variable Valve timing?

    ... add an additional component between the camshaft and its sprocket. This component, the cam phaser, can alter the rotational position of the camshaft in relation to that sprocket, perhaps by as much as 30°. These phasers usually work via oil ...

    Simon Hancocks - 18/12/2018 - 16:48 - 0 comments

  8. 2013 Kawasaki Z800 review

    ... marginally higher and there are two extra teeth on the rear sprocket. The four-pot brakes are new and the styling, while fresh, is ... is different, Kawasaki have gone two teeth up on the rear sprocket. That’s some change! The Z800 doesn’t need any help getting off ...

    Ben Cope - 09/09/2019 - 03:05 - 0 comments

  9. D.I.Y: How to fit a Scottoiler

    ... be mounted towards the end of the swingarm, near the rear sprocket. Remember the delivery tube has to have enough slack in it to allow ... is bent in such a way that it delivers oil against the rear sprocket at a six o'clock position, approximately two milimetres above the ...

    rgo - 23/09/2019 - 00:52 - 0 comments

  10. The best Honda CB750 and CB1000R Customs at 'Glemseck 101'

    ... to a Light Tech platform Three tooth larger rear sprocket and one tooth smaller front sprocket The 107kW engine was left untouched, but the power is ...

    HazaMck - 05/09/2019 - 13:33 - 11 comments

Pages