YouTube:
Instagram:
Facebook:
Twitter:
... design four pot calipers. Although it was much lower on the Dyno figures than the others it never showed it around Rockingham circuit. Easy ... design four pot calipers. Although it was much lower on the Dyno figures than the others it never showed it around Rockingham circuit. Easy ...
Anonymous (not verified) - 10/05/2024 - 04:26 - 0 comments
... have on the bike both at the track and the workshop on the dyno will sort this. I think they will find a fair bit more, we are still ...
jon96 - 10/05/2024 - 04:24 - 0 comments
... very well and good until owners actually put the bike on a dyno and discovered the rev gauge was somewhat optimistic, by about 1,500rpm. ...
Visordown - 10/05/2024 - 04:15 - 0 comments
... power commander 3 and after careful setting up on the dyno it puts out 108 RWHP which isn't too bad for the old girl. Perfect ...
Anonymous (not verified) - 01/01/1997 - 00:00 - 16 comments
... best increase in bottom end. It’s worth getting your bike dyno’d if you are making any exhaust mods as machines vary and what works ...
rgo - 10/05/2024 - 04:16 - 0 comments
... way to hit the fever pitch would be to stick the thing on a dyno at the NEC. The crowds gathered, the children looked on - then screamed ...
Simon Hancocks - 05/01/2020 - 12:17 - 19 comments
... With everything swapped over, the bike gets run on the dyno and the problem rears its head again. The can-do attitude in the Triumph ...
Ben Cope - 10/05/2024 - 04:09 - 0 comments
... the power feeling surprisingly strong in the mid-range, the dyno showed the GSX-R peaking at just 98bhp, which is somewhat underpowered ...
Ben Cope - 10/05/2024 - 03:49 - 0 comments
... 108 and 120bhp at the back wheel - so you may want to see a dyno before buying your bike. After all, who wants a Blade with little more ...
Anonymous (not verified) - 10/05/2024 - 04:26 - 0 comments
... suggest you save that bag of sand for a few parts and some dyno time. Can’t wait to see what the tuners and builders do with this ...
Rob Hoyles - 10/05/2024 - 03:49 - 0 comments