i have a berg 03 on, piston part number 9243D 820-100 group #1was sent out incorrectly will swap for older piston or sell £75p+psend me a pm and its new

Does anybody have a list or website to hand that lists piston dimensions. I want ot see if anything will or can be made to cross ref. with the VOR piston. I have my old cracked one to measure but I would like to know for future use.Cheers guys. Shut

hi for some reason i have a 650 piston in a 550 box, does anyone have a 550 piston or want a 650 piston. i have tried DCR but need one asap Give Keith, Paul or Will a bell at Scorpion Motosport 01617249518 Tuesday after 9 30 and see what they can

My bike needs new rings AGAIN. In 4000km it will also be due for a piston.So when its stripped for new rings should I replace the piston now or wait 4000km and replace it then. I agree with Tomcat always fit both if you can afford it, the ring

Ok so we got the barrel off the KX65 then the piston off the rod.Soooooo how on earth does one get the new piston back in, is there a secret to compressing those rings so it fits into the barrel? well u go out and buy a ring compresser..... or

Renember reading somewhere that you should put the piston pin in the freezer before fitting it but I cant renember how long for? priller wroteRenember reading somewhere that you should put the piston pin in the freezer before fitting it but I cant

how do u free a sticky piston in ur front brake caliper coz i only got the one that sticks. and i gotta replace the pads anyway... knackered is not the word.also... is it ok to emery paper the wheel spindle ever so slightly to make it spin better

are both of them supposed to move at the same time or is one supposed to move slightly b4 the other one.i got some new brake pads and think the pistons are sticking... but im not sure coz they all move when u put the lever on... but they dont move

Can anyone tell me if .25 on a piston from a 89'/90' CR500 is the first oversize or what, cant remember cheers. Just asked a CR500 race engine builder mate..25 is the first oversize

Help me please.....I need to find out some africa twin piston dimensions. Tried searching on the web but had no luck,so if someone has access to the following info i'll be eternally grateful gudgion pin o/d,deckheight of a standard pistonoverall