Continuing (still) the quest for the solution to my Burgman's cold weather starting problem, I've discovered a reference, buried deep in the workshop manual, to a carburettor (sp?) heater. It's supposed to warm the fuel mixture to aid vaporisation
hi, i was wonderimg if anyone could help me? Ive posted it already in workshop but i really need help soon, the problem is getting worse and im losing quite a bit of petrol and ruining my driveway!basically after i stripped the carburettor on my nsr
Spent a frustrating night trying to rebuild my carbs.I've got them back together, however slides do not all return at the same rate. 3 of them slide back down, steadily, whilst the 4th snaps shut like a well adjusted throttle snaps shut.Which is the correct slide return rate?And ...
had these hanging around too long so they r on ebay no reserve 99p starthttp://cgi.ebay.co.uk/GPZ-550-Carbs-carburettor-spares-or-repairs_W0QQitemZ180259693129QQcmdZViewItem?hash=item180259693129&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0
I'm after a bit of advice on changing the carb setup on my SZR660.As standard there is a smaller round slide and a larger CV carb working (not very well) together. From what I've read on SZR and MZ Skorpion (same engine) forums the ideal carbs are something like a pair Mikuni TM3...
Last week I ran out of petrol, not good! Since then my bike has not been at all well. (GPZ 500) Coughing at low speed and I'm sure I can smell petrol now.Q1 - am I gonna damage my bike if I keep riding it like it?I've had a quote from a local garage to clean em out for me £50-£70...
Me bikes overfuelling and fouls plugs in 200 miles so bad it wont start. Had it in bits and found the jet sizes have been changed, the pilot screw has also been altered. The stock setting for the pilot screws is 2 and a quarter turns out but they are set to 1 turn out. To make it...
Hi there.I've just bought a 1983 GSX 550 ESD (non-runner), and have so far been unable to get it running again. The problem is that the petrol isn't getting from the carbs to the engine.I've stripped the carbs, checked all the jets (they're all clear) and checked the float height...
Anyone got a set of vacuum gauges for sale that would be OK for four cyl bike, if you have give'us a shout and let me know what make they are and more importantly how many ££££'s.Ta
Have 3 sets of carbs.GPX750 KawasakiGSX1100 EFE Suzuki And mystery cv's that came off my GPz1100 B1 prior to me fitting flatslides. (Early GPz's had DFI as standard)£30 ono per setAndyCoventry07900 683 327
Become a fan of Visordown
Follow us on twitter
Other Immediate Media Sites
Our eCommerce Platform
© Immediate Media Company Ltd 2012. This website is owned and published by Immediate Media Company Limited. www.immediatemedia.co.uk