| |
 |
How to replace wheel bearings
By James Whitham on 18/11/2010 13:33:53
Get the knowledge on the easiest way to replace your wheel bearings
Wheel bearings have to put up with a quite a lot of stick. Other than whizzing around at speeds of up to 2,000rpm, they have to support the weight of you and your bike, survive fast acceleration and deceleration and endure the British climate. All
|
|
 |
Two wheels on the radio
By Visordown News on 26/05/2011 16:16:16
Radio Silverstone launches new 'On Two Wheels' show
RADIO Silverstone have launched a new two-hour motorcycling show.The 'On Two Wheels' show will air every Thursday from 8pm till 10pm on 87.7FM and streamed online at www.silverstone.co.uk/radio.The radio slot will feature interviews, topical debates
|
|
 |
10 Steps for easy wheel removal
By Daryll Young on 10/11/2010 15:39:11
Follow these instructions for the quick and easy know how to getting your wheels out
the rear spindle nut is off and the spindle tapped through a short way. Note the use of rubber mallet.5. Knee supporting the wheel, one hand holding it, the other knocking the spindle until it can be pulled by hand.6. Wheel out but spindle back in place
|
|
 |
Maxime Berger loses wheel in crash
By Visordown News on 28/03/2011 10:39:41
Rear wheel shearing causes the Supersonic Ducati rider to crash out of race one
One of the most bizarre crashes at Donington Park took place in race one when the rear wheel of Maxime Berger's Ducati 1198 parted from the swingarm.With Berger falling from the Ducati looping away beneath him the original thought to the rear wheel
|
|
 |
D.I.Y: Wheel Removal
By Daryll Young on 10/11/2010 16:02:24
Cheap mail order tyres are all very well, but the cost of getting them fitted can offset the saving. By taking loose wheels to your local dealer you can slash the labour charge and be quids in. Here's how to get 'em out
Click here for 10 easy steps on how to remove your wheelsApologies if we're teaching some of you to suck eggs here, but here we're going to look at wheel removal and refitting. Sounds like a simple job, but there are some important things to bear
|
|
 |
Three wheeled death machine
By mark forsyth on 04/11/2010 15:23:27
...always knew three wheels were a bad idea.
|
|
 |
Two wheel drive revived?
By daz max on 25/01/2007 00:54:50
KTM have started work on a two wheel drive system
to say:"Following the footsteps of Yamaha with their 2-Trac two wheel drive system for motorcycles, Austrian motorcycle manufacturer KTM has developed it's own version and has been testing it on a motocross bike."KTM says the results are good, allowing
|
|
 |
Wheels to Work Association launched
By Visordown News on 18/01/2013 10:30:41
New body to bring together and govern UK's W2W schemes
A NEW association representing Wheels to Work schemes across the UK was launched yesterday.The Wheels to Work Association (W2WA) marked its official launch with its first annual conference, held in London.Wheels to Work schemes provide transport
|
|
 |
Quadro Parkour four wheeled scooter
By Visordown News on 19/11/2012 10:27:45
Two's company, three's a crowd, so what's four?
ITALIAN company Quadro (which already makes MP3-type scooters) has taken an extra wheel and thrown it at our petulant faces, in the form of the Parkour, the world's first four-wheeled scooter. The 350cc, 27 bhp, 250kg Parkour looks very similar
|
|
 |
VIDEO: Front wheel change at 50mph
By Visordown News on 05/03/2009 16:39:23
Swapping front wheels while wheelying at 50mph - whatever next?
CHECK OUT this novel way of changing your front wheel, done on the move at 50mph. And the 'passenger' changing the wheel is the stunt rider's girlfriend. Good work, pillion woman!Hope she did the spindle nut up tight enough...
|
|
