Race winning SVs

9 messages
10/07/2006 at 18:38
oK Folks,

These now have to go as i'm ordering my new steed, hence price drop

For sale are my fully prepared fuel injected K3/K4 SV650's.

Both bike's are more or less identical and have served me very well at MRO and EMRA this year. They have been on the MRO podium 9 times and have had 4 wins at EMRA Thunderstocks.

Spec is as follow's

#1 Bike

Maxton rear shock
Full Maxton front fork internals
Hindle exhaust with SDC link pipe to underseat can
K6 GSXR1000 fairing
SDC rear sets
SDC fairing brackets
SDC clock mount
SDC lightweight subframe
SDC battery box (996 style)
Race wiring loom
Side mounted steering damper (sprint unit)
Galfer wavey disks front and rear
Quarter turn throtle
Braided brake lines
Performance Friction pads
R&G crash bungs
WOW's with standard disks
Levers, bars, sprockets pegs

The oil has been replaced after every meeting and was only built at the begining of this year from a low mileage "53" plated bike.

£3700 ono

#2 Bike

Built by SDC performance middle of last year and only used a couple of times by it's previous owner, I have probably only used it a handfull of times also.

Maxton rear shock
Full Maxton front fork internals
Hindle exhaust with SDC link pipe to underseat can
SDC rear sets
SDC fairing brackets
SDC clock mount
SDC lightweight subframe
SDC battery box (996 style)
Race wiring loom
Galfer wavey disks front and rear
Quarter turn throtle
Braided brake lines
Performance Friction pads
R&G crash bungs
Spare front and rear wheels.
Spare levers, clip-on's, sprockets

Again this bike has had it's oil changed everytime it's been used and never wanted anything.

£3700 ono

Genuine reason for sale

Both bikes are in extreamly good condition and are certainly two of the best pre-pared bikes out there, any viewings are welcomed.

Bikes are based in Manchester.

Any questions please give me a call on 07855 454901, If you want some pictures please give me a call.

Paul Turner #97

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
10/07/2006 at 21:18
Toadie wrote
For sale are my fully prepared fuel injected K3/K4 SV650's.

Both bike's are more or less identical and have served me very well at MRO and EMRA this year. They have been on the MRO podium 9 times and have had 4 wins at EMRA Thunderstocks.

Spec is as follow's

#1 Bike

Maxton rear shock
Full Maxton front fork internals
Hindle exhaust with SDC link pipe to underseat can
SDC rear sets
SDC fairing brackets
SDC clock mount
SDC lightweight subframe
SDC battery box (996 style)
Race wiring loom
Side mounted steering damper (sprint unit)
Galfer wavey disks front and rear
Quarter turn throtle
Braided brake lines
Performance Friction pads
R&G crash bungs
WOW's with standard disks
Levers, bars, sprockets pegs

The oil has been replaced after every meeting and was only built at the begining of this year from a low mileage "53" plated bike.

£4100 ono

#2 Bike

Built by SDC performance middle of last year and only used a couple of times by it's previous owner, I have probably only used it a handfull of times also.

Maxton rear shock
Full Maxton front fork internals
Hindle exhaust with SDC link pipe to underseat can
SDC rear sets
SDC fairing brackets
SDC clock mount
SDC lightweight subframe
SDC battery box (996 style)
Race wiring loom
Galfer wavey disks front and rear
Quarter turn throtle
Braided brake lines
Performance Friction pads
R&G crash bungs
Spare front and rear wheels.
Spare levers, clip-on's, sprockets

Again this bike has had it's oil changed everytime it's been used and never wanted anything.

£4000 ono

Genuine reason for sale

Both bikes are in extreamly good condition and are certainly two of the best pre-pared bikes out there, any viewings are welcomed.

Bikes are based in Manchester.

Any questions please give me a call on 07855 454901, If you want some pictures please give me a call.

Paul Turner #97


Do you work for Carole Nash loan bikes dept perchance?

Serving the stars of the Jeremy Kyle show since 2007
11/07/2006 at 08:21
Chazza,

I run the Carole Nash workshop

SV's are us!

Paul T

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
12/07/2006 at 08:39
May take a part ex on these folks, SS600???

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
13/07/2006 at 15:59
BTTT

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
15/07/2006 at 21:36
And again!!!

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
17/07/2006 at 15:35
Gotta go folks

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
18/07/2006 at 10:42
I've raced against Toadie all this season.....

Ok, ok, he's been beating me all this season.....

These are very well prepared bikes and are bl**dy quick, whoever purchases these will not be disappointed and will be certain that they can run up the front of any minitwin class if they have the talent....

Somebody please buy them before I end up with another SV...!!!

Reggie Perrin

20/07/2006 at 19:08
BTTT New picture added

Thanks to my sponsors

Carole Nash Service and repair centre
Maxton Engineering
Shell oils - UK
Fowlers of Bristol
Your say
email image
9 messages
Forum Jump