Suzuki’s TL1000R was, if the pre-launch hype was to be believed, the company’s great white hope. The marketing types lead us to think this 1000cc V-twin would take on Ducati in World Superbikes and crush the insolent Italian factory at their own game. Japan’s V-twin would demonstrate that the only reason the Bologna factory was dominating WSB was due to the fact V-twins had an advantage over 750cc inline fours. Well, that was the plan.
Under a fanfare of expectation, the TL1000R was launched in spring 1998. But rather than the firecracker it was hyped up to be, the TL turned out as a bit of an overweight damp squib. Unfortunately, despite the best efforts of the marketing people to sway minds otherwise, this was something it was always destined to be.
The problem was Suzuki had been badly burned the year before by the naked, and by this point infamous, TL1000S. Handling issues, the bike’s reputation as a “widow-maker” and a humiliating recall for the fitment of a steering damper had put a large black mark against the TL name. Even if the R had proved to be a track missile, the fact it used the much-maligned rotary rear damper had already sealed its fate.
The TL1000R didn’t impress on track, failed to set the showroom alight, never took part in WSB as a factory racer and failed miserably to live up to its hype. After just six years, Suzuki pulled the plug on the TL1000R and concentrated on putting the V-twin engine in less sporty bikes.
The problems with the TL1000R lay much deeper than just an over-hyped launch and a dodgy sibling, from the moment the project was conceived it was doomed.
According to its designer, Hiroshi Moritake, the TL1000R was designed to be “the best potential Superbike winner.” Unfortunately, somewhere along the design path, this message got lost and rather than the svelte Ducati, the TL emerged as a rather tubby and bulky bike. Tipping the scales at 197kg the TL was 20kg heavier than Yamaha’s new YZF-R1 and made a lot less power. Okay, as Suzuki were quick to point out, it did weigh the same as a 996 and made more power than the Ducati, but it neither felt, nor handled, like a potential Superbike.
Continue the Suzuki TL1000R used review
Restoring a Suzuki TL1000R
Considering the ready availability of Suzuki TL1000Rs in the UK, and their relative unpopularity, you shouldn’t have to go through the effort of rebuilding one. It’s easy to buy a minter, which will require little or no restoration. If you’re looking at a bike and doing mental arithmetic on the cost of putting it straight, walk away. However, it is likely a few parts may need refreshing, or even replacing, should yours be less than perfect.
The most common alteration is the fitment of aftermarket race cans. While more power’s on the cards if you fork out for the relevant re-map, most owners simply want more noise. New standard Suzuki cans cost £654 each, which is eye-watering. But some time spent keeping an eye on eBay can locate them for as little as £50 a side. Aftermarket cans are about £150 a pair for low-end items. A second-hand header pipe is about £140, but most owners simply bolt on cans.
For some odd reason a lot of blue and white bikes now sport blue-tinted screens. A stock screen costs £73 from Suzuki or about £20 second-hand. Rearsets are also quite common on TLs but again, stock ones are very easy to find second-hand – shelling out about £50 for the assembly is better than the £80 Suzuki ask. Pillion pegs often get removed. If you can’t find any second-hand for about £25 a side, prepare to be shocked and pay £73 a side at your Suzuki dealer. Unfortunately, only the heel plates and front brakes are the same as the 1998 GSX-R750, so no penny-pinching by taking that route.
For a visual re-fresh, expect to pay about £40 a wheel to get them re-powder coated (www.triple-s.co.uk are excellent). The Suzuki finish is quite poor, and a re-spray will be close to £1,000, depending on the damage to be repaired and the colours involved. As ever when buying a bike of this age, pay close attention to the plastics – cosmetic tidying is so much more expensive than an oil change and a service.
Race bodywork costs about £150 for a plain fairing or close to £400 for a replica kit, including seat plastics, from Hong Kong. These are both available on eBay.
A Suzuki side panel costs £486 and comes painted, while the headlight cowl is £230. If the pillion seat cover is missing a new one will cost you £90 from Suzuki UK.
A lot of parts are expensive for the TL because they are unique to the bike and not interchangeable with any other Suzuki models, so take your time and buy carefully. Buy a good one, not one to restore, and it will save you a lot of cash in the long run. You’ll also have a monstrous road bike.