Without its Monster range, Ducati wouldn’t be in existence today. It’s as simple as that. While the 916 and its designer Massimo Tamburini might have been grabbing the headlines in 1995, none of his work would have made it out of the factory’s gates had it not been for the genius of Miguel Galluzzi and his incredible foresight.
Using his philosophy that all a motorcycle needed was “a saddle, tank, engine, two wheels and handlebars,” Galluzzi took the trellis chassis from the 888, mated it to the 904cc air-cooled engine from the 900SS and debuted his new bike at the Cologne Motorcycle Show in 1992. He called it a Monster, and it was the first modern streetbike.
In 1993, the term “street bike” or “naked” bike didn’t exist. With the introduction of the FireBlade in 1992 sportsbikes were kings and rider’s minds were either focused on going fast or touring. There were some bikes without fairings, but these were either middle of the road commuters or outdated and heavy retro bikes. All were a far cry from the glorious Monster. Next to the light and sharp steering Ducati, bikes such as Honda’s insipid CB1000 (Big 1) and Kawasaki’s terrible Zephyr 1100 were outdated dinosaurs. The Monster was something new, a bike with the chassis and engine from a sportsbike, but the look of a café racer. Riders all across Europe went nuts for this new concept from Ducati, which inevitably lead to other issues.
“It wasn’t a matter or selling them, it was getting the bike in the first place,” says Ray Petty, who ran Claesson Motorcycles in 1993. “The reaction was amazing, the Monster was affordable and people snapped it up. But the factory was a nightmare. Because money was tight they didn’t pay people like Brembo, so bikes were stuck on the production line without brakes, as Brembo refused to supply calipers until they’d been paid.
“Then there was the finish. They used to paint the bikes in one factory then wheel them across to another with the paint still wet, the finish always had blemishes. It was a bloody shambles.”
But shambles or not, the Monster 900 captured the imagination of a wider audience and, from its launch in 1993, went from strength to strength, mutating into various sizes with different engines but still remaining true to its original design. Which is both its charm and its downfall.
Continue for the 1993 Ducati Monster M900 used review
People who have rebuilt Monsters claim you can strip one in about two hours once you know what you are doing. Take off the tank, seat and forks and then just two bolts separate the frame from the engine/swingarm. Once apart, you can remove the swingarm from the back of the motor. The finish on the engine cases and heads is notoriously poor, so you will have to strip the motor. Expect to pay a professional about £800 to strip and rebuild it for you, plus parts. After 50,000 miles the engine will need new piston rings and new main bearings, so it’s worth doing this and checking the sprag clutch.
The engine is painted in heat resistant silver paint, which is easy to get done. Ask your bike shop to recommend a local painter. The bronze frame colour, which Ducati use, is notoriously hard to match, and varies with models. Find the paint code for your bike in its manual or ask a Ducati dealer. Expect to pay about £300 for the frame and engine bits to be cleaned and painted. Powder coating the wheels black costs £80, while a tank, mudguard and seat respray will set you back another £300. But add £100 if it has any dents.
Parts such as indicators, mirrors and footrest hangers are standard to all Monsters and many other Ducati models, so save cash by scouring eBay. The front light is the same part as a BMW R80 or R100. Ducati charge £180, BMW closer to £30.
Warped front discs are not uncommon on Monsters and replacements cost £140 each, but that’s not a patch on the £408 for each exhaust pipe. Owners nearly always change theirs, get on the Monster Club website and buy a second hand set. The Showa shock can be rebuilt for about £100, with an extra £8 for powder coating the spring yellow. Refreshing the forks costs about £150. For a modern bike the Monster is relatively easy to work on, especially if it’s a carbed, and not injected, model. The finishes are all fairly standard, so specialist painters aren’t necessary.
As with any work you attempt on a bike, ensure you have all of the correct parts in your hands before you start removing the old stuff. This includes tooling. Ring a Ducati dealer and explain what you intend to do and check that you don’t need a specialist tool that you can only rent/buy from a Ducati specialist.