Advanced Riding Course: Track Riding Techniques

Once you’re comfortable in the trackday environment, it’s time to go faster. Niall Mackenzie recommends a couple of techniques to tease more speed from you and your bike

Posted: 15 April 2010
by Niall Mackenzie

 1 of 2 

Clutchless shifting

I’m always surprised by the number of riders who don’t do this, particularly since it can make your riding smoother and faster. Done properly, the technique also puts less strain on your engine and transmission.

I am of course talking about changing up through the gears – while shifting down without the clutch isn’t impossible, it can be dangerous and expensive. I know some club racers who claim never to use the clutch while shifting down but they’re also rubbish, and that’s probably why.

This technique for near-seamless gearchanges is simple and easy to master. When doing it for the first time it’s best to practice between third, fourth, fifth and sixth gears. While accelerating gently, put some light pressure under the gearlever. Then when you’re carrying some decent revs and you’re ready to change up, just roll the throttle back slightly – a few millimetres is enough. The gearbox should slot instantly into the next gear. That’s it.

From there it’s just a case of practice – you’ll soon be doing it without even thinking. I suggest trying it with higher gears initially since smooth shifts between first and second can be tricky at first. That said, once you’ve developed a feel for your engine and gearbox, shifting without the clutch will become a doddle in any gear.

You’ll soon discover how smooth and effortless changing up clutchlessly is, and how little lever pressure and throttle movement you actually need for perfect shifting. There are some riders who take this a stage further and use the rev-limiter to temporarily take the load off the gearbox, letting them keep the throttle wide open. I wouldn’t recommend this. By the time most engines have reached their rev-limiter they’ve have stopped accelerating, so this crude quick-shifting method is a sure fire recipe for costly mechanical damage.

Does ‘blipping’ help?

It also makes sense to keep things smooth while coming back down through the gears, so if this is a problem blipping might help. When asked about whether blipping (momentarily opening the throttle quickly between downshifts) helps, my answer is a cautious “sometimes”. Certainly if you ride a high performance two stroke then a blast of fuel can be crucial to avoid seizures. However, on four strokes, blipping is simply about easing the transmission into the next gear down. In high gears, when the revs are low, this isn’t essential, but it’s important to let the clutch out between shifts to avoid false neutrals and lock-ups.

Blipping between downshifts works best when you want more engine braking. The technique can be particularly effective in the wet, when you want help slowing down without using the brakes. If you find you can’t blip the throttle without squeezing the front brake and making the forks dive momentarily, practice while stationary. Put two fingers over the brake lever and try to keep a constant pressure while opening and closing the throttle slightly. Blipping can prove difficult if the brake lever is too far out, so a simple adjustment to bring it in a little might help. Keep practising until you can work the throttle without altering the pressure you’re applying to the brake lever.

Click next for more


Previous article
Advanced Riding Course: Body position and knee down
Next page
On the track


trackday, track riding, tips, advanced riding course, techniques
TwitterStumbleUponFacebookDiggRedditGoogle


Discuss this story

Talkback: Advanced Riding Course: Track Riding Techniques



Busiest motorcycle review conversations